A 15 mV Inductorless Start-up Converter Using a Piezoelectric Transformer for Energy Harvesting Applications - Archive ouverte HAL
Article Dans Une Revue IEEE Transactions on Power Electronics Année : 2018

A 15 mV Inductorless Start-up Converter Using a Piezoelectric Transformer for Energy Harvesting Applications

Résumé

This paper presents an inductor-less start-up converter for a sub-100 mV energy harvester based on an Armstrong oscillator topology using a piezoelectric transformer and a normally-on MOSFET. Two models of the converter have been detailed and validated experimentally for the start-up phase and steady-state operation to respectively determine the minimum start-up input voltage and the voltage gain. The models have been validated experimentally in a setup associating the converter and a thermo-electric generator. Based on a Rosen-type piezoelectric transformer and off-the-shelf components, the proposed start-up topology begins to oscillate at 15 mV and achieves a 1 V output voltage at only 43 mV. Compared to the literature, the topology needs no inductive component and achieves self-starting operation with a smaller input voltage.
Fichier principal
Vignette du fichier
Publi Final Martinez Camera Ready.pdf (1.25 Mo) Télécharger le fichier
Origine Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-01735605 , version 1 (16-03-2018)

Identifiants

Citer

Thomas Martinez, Gaël Pillonnet, François Costa. A 15 mV Inductorless Start-up Converter Using a Piezoelectric Transformer for Energy Harvesting Applications. IEEE Transactions on Power Electronics, 2018, 33 (3), pp.2241-2253. ⟨10.1109/TPEL.2017.2690804⟩. ⟨hal-01735605⟩
256 Consultations
636 Téléchargements

Altmetric

Partager

More