SH-SAW VOCs sensor based on ink-jet printed MWNTs / polymer nanocomposite films - Archive ouverte HAL Accéder directement au contenu
Communication Dans Un Congrès Année : 2017

SH-SAW VOCs sensor based on ink-jet printed MWNTs / polymer nanocomposite films

Résumé

This study presents Shear Horizontal Surface Acoustic Wave (SH-SAW) sensor based on ink-jet printed poly (3,4-ethylenedioxythiophene) polystyrene sulfonate – multi wall carbon nanotubes (PEDOT:PSS-MWCNTs) and MWNTs-based inks as sensitive gas material. Experiments show the validation of fabrication process of acoustic platform and ink-jet printed sensitive layers. The characterization of two devices under different concentrations of ethanol vapor shows promising results in terms of reproducibility of the measurements. A sensitivity of 12Hz/ppm was recorded with the sensor based on ink-jet printed 600nm thickness sensitive layer.
Fichier principal
Vignette du fichier
IEEESensors2017_SH-SAW VOCs sensor based on ink-jet printed MWNTs-polymer nanocomposite film-VF-HAL.pdf (925.54 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01719051 , version 1 (27-02-2018)

Identifiants

Citer

H. Hallil, Q. Zhang, E. Flahaut, K Pieper, L Olçomendy, et al.. SH-SAW VOCs sensor based on ink-jet printed MWNTs / polymer nanocomposite films. IEEE Sensors, Oct 2017, Glasgow, Ireland. ⟨hal-01719051⟩
310 Consultations
79 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More