Contact resistance estimation of vehicle charging connector - Archive ouverte HAL Accéder directement au contenu
Communication Dans Un Congrès Année : 2017

Contact resistance estimation of vehicle charging connector

Résumé

The paper proposes a method to estimate the contact resistance inside the outlet between a charging cable and an electric vehicle. First, an electro-thermal model of some compo- nents close to the contact area inside the vehicle outlet (in the female part of the outlet) and of the harness inside the vehicle is proposed. The charging cable and the associated components are the male parts of the outlet. They are not modeled as these components can differ from a charging to another. They also depend on the mode and the charging infrastructure used. It is only supposed that the charging cable evacuates an unknown heat rate. A linear approximation of the electro-thermal model is then obtained and used to design a closed loop estimator of the total heat rate at the contact area. Using this information, a least square method is used to estimate the contact resistance that can be deduced from the first values of the total heat rate after a step variation of the current in the charging cable.

Domaines

Automatique
Fichier non déposé

Dates et versions

hal-01709886 , version 1 (15-02-2018)

Identifiants

  • HAL Id : hal-01709886 , version 1

Citer

Jocelyn Sabatier, Mathieu Chevrié, Christophe Farges, Franck Guillemard, Laetitia Pradere. Contact resistance estimation of vehicle charging connector. IEEE Vehicle Power and Propulsion Conference (VPPC), Dec 2017, Belfort, France. ⟨hal-01709886⟩
56 Consultations
0 Téléchargements

Partager

Gmail Facebook X LinkedIn More