An Anisotropic Modeling of the Visco-hyperelastic Behaviour of PET under ISBM Process Conditions - Archive ouverte HAL Accéder directement au contenu
Communication Dans Un Congrès Année : 2015

An Anisotropic Modeling of the Visco-hyperelastic Behaviour of PET under ISBM Process Conditions

Résumé

The mechanical behaviour of Polyethylene Terephthalate (PET) under the severe loading conditions of the injection stretch blow moulding (ISBM) process is strongly dependent on strain rate, strain and temperature. In this process, the PET near the glass transition temperature (Tg) shows a strongly non linear elastic and viscous behaviour. In author's previous works, a non linear visco-hyperelastic model has been identified from equi-biaxial tension experimental results. In this work, the proposed non linear visco-hyperelastic model is implemented into the Abaqus environment and used to model the equal-biaxial tension tests. Despite the good agreement with biaxial test results, the model fails to reproduce the shape evolution during the free blowing of preforms. An anisotropic version of this visco-hyperelastic model is proposed and the free blowing simulation is compared with the experimental results managed in Queen's University Belfast.
Fichier principal
Vignette du fichier
abstract_etendu_DEPOS26_comments.pdf (212.25 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01647479 , version 1 (24-11-2017)

Identifiants

  • HAL Id : hal-01647479 , version 1

Citer

Yun Mei Luo, Luc Chevalier, E. Monteiro. An Anisotropic Modeling of the Visco-hyperelastic Behaviour of PET under ISBM Process Conditions. DEPOS 26, Sep 2015, Aber Wrac'h, France. ⟨hal-01647479⟩
76 Consultations
44 Téléchargements

Partager

Gmail Facebook X LinkedIn More