Soot and velocity mapping and 2D soot sheet dimensions in a buoyant wall-fire - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Proceedings of the Combustion Institute Année : 2017

Soot and velocity mapping and 2D soot sheet dimensions in a buoyant wall-fire

Résumé

The study used a vertical porous burner fueled with a CH4/C2H4 mixture burning in quiescent ambient air to measure the soot content of a vertical turbulent wall flame. Soot volume fractions were determined by planar laser induced incandescence (LII). Particle image velocimetry (PIV) was used to measure the vertical velocity of the mean flow. The mean soot volume fraction and vertical velocity values were mapped with a two-dimensional (2D) imaging technique. Soot volume fraction flux was analyzed as a function of height. The results show that, in the top zone of the flame, the soot formation was counterbalanced by oxidation with air. In addition, each instantaneous 2D soot sheet was analyzed to determine two parameters: the soot volume fraction maximum f(v,max) and the horizontal width delta(FWHM). For both parameters, average and RMS (root mean square) values were calculated at each height. Except for the bottom zone of the burner, average values varied little with height, whereas RMS values remained persistently high. It is found that, with increasing heights, there exist far from the burner and in the lean side of the flame more and more soot sheets with high values of f(v,max) and delta(FWHM). (C) 2016 by The Combustion Institute. Published by Elsevier Inc.
Fichier non déposé

Dates et versions

hal-01611165 , version 1 (05-10-2017)

Identifiants

Citer

Andres Valencia, Martine Talbaut, Jérôme Yon, Gilles Godard, Carole Gobin, et al.. Soot and velocity mapping and 2D soot sheet dimensions in a buoyant wall-fire. Proceedings of the Combustion Institute, 2017, 36 (2), pp.3219--3226. ⟨10.1016/j.proci.2016.06.142⟩. ⟨hal-01611165⟩
104 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More