Influence of electrolyte ageing on the Plasma Electrolytic Oxidation of aluminium - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Surface and Coatings Technology Année : 2015

Influence of electrolyte ageing on the Plasma Electrolytic Oxidation of aluminium

Julien Martin
  • Fonction : Auteur
  • PersonId : 758991
  • IdRef : 140830529
Alexandre Nomine
Delphine Veys-Renaux
Gérard Henrion
Thierry Belmonte

Résumé

The chemical stability of the electrolyte in Plasma Electrolytic Oxidation (PEO) has been the subject of much systematic investigation. The present study reports on experimental results on the ageing of a usual PEO electrolyte and its effect on the oxidation of the Al2214 aluminium alloy. A solution of potassium hydroxide ([KON] = 1 g L-1) and sodium silicate ([Na2SiO3] = 1.65 g L-1) diluted in deionised water was either aged by running a process during 8 h at most or not Comparison between materials treated in either solution was made next Cross-checked experimental results from analytical chemistry, plasma diagnostics and materials science clearly evidence the effect of ageing of the electrolyte on the PEO process behaviour. The transition from arc to ``soft'' regime occurs earlier (from 18 min to 13 min processing time) as the electrolyte gets older. The concomitant decrease in the electrolyte electrical conductivity (from 7.5 mS cm(-1) to 6.8 mS cm(-1)) is correlated with changes in the ionic species content in the electrolyte. Fast video-imaging (125 kfr/s) reveals that the micro-discharge characteristics are also sensitive since they become less numerous perarea and unit time (from 220 x 103 cm(-2) s(-1) to 120.x 103 cm(-2) s(-1)), exhibit shorter lifetime and have smaller sizes as the electrolyte ages. SEM observations of the as-grown coatings combined with roughness measures indicate a decrease in coating thickness (similar to 20%) and roughness (similar to 30%) while species from the electrolyte accumulate in the outer porous layer simultaneously with a gradual enrichment in alpha-Al2O3 phase in the inner compact layer (from 36% to 43%). Finally, within the PEO conditions that were used, it is shown that the ageing phenomenon of the PEO electrolyte starts to influence the process after 2 h aged.
Fichier non déposé

Dates et versions

hal-01285978 , version 1 (10-03-2016)

Identifiants

Citer

Julien Martin, P. Leone, Alexandre Nomine, Delphine Veys-Renaux, Gérard Henrion, et al.. Influence of electrolyte ageing on the Plasma Electrolytic Oxidation of aluminium. Surface and Coatings Technology, 2015, 269, pp.36-46. ⟨10.1016/j.surfcoat.2014.11.001⟩. ⟨hal-01285978⟩
64 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More