Modeling the injection of textured molds - Archive ouverte HAL Accéder directement au contenu
Communication Dans Un Congrès Année : 2015

Modeling the injection of textured molds

Rebecca Nakhoul
  • Fonction : Auteur
  • PersonId : 766750
  • IdRef : 177533757
Patrice Laure
Luisa Silva
Michel Vincent

Résumé

Micro-injection molding is frequently used in micro-medical, micro-optic and micro-mechanics due to its effectiveness for mass production. This work focuses mainly on offering numerical tools to model the injection of textured molds. Such tools can predict the different filling scenarios of the micro-details and consequently offer optimal operating conditions (mold and melt temperatures, melt flow, stresses etc.) to judge the final part quality. To do so, a fully Eulerian approach is used to model the injection of textured molds on both the macroscopic and microscopic scales. Beginning with an industrial software Rem3D, the process is modeled on the macroscopic scale where the micro details are not detected. Although the melt temperature and evolution are tracked in time, neither the micro details nor the mold temperature are properly represented. Since the thermal transfers with the mold are very relevant due to the cooling ratio, simulation on the microscopic scale are a must to insure a complete and accurate representation of textured molds injection.
Fichier principal
Vignette du fichier
2015_CFM_Nakhoul_Laure_Silva_Vincent.pdf (319.02 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01284632 , version 1 (07-03-2016)

Identifiants

  • HAL Id : hal-01284632 , version 1

Citer

Rebecca Nakhoul, Patrice Laure, Luisa Silva, Michel Vincent. Modeling the injection of textured molds. Congès Français de Mécanique 2015, Aug 2015, Lyon, France. ⟨hal-01284632⟩
370 Consultations
156 Téléchargements

Partager

Gmail Facebook X LinkedIn More