Low-Frequency MEMS Electrostatic Vibration Energy Harvester With Corona-Charged Vertical Electrets and Nonlinear Stoppers - Archive ouverte HAL
Communication Dans Un Congrès Année : 2015

Low-Frequency MEMS Electrostatic Vibration Energy Harvester With Corona-Charged Vertical Electrets and Nonlinear Stoppers

Résumé

This paper reports for the first time a MEMS electrostatic vibration energy harvester (e-VEH) with corona-charged vertical electrets on its electrodes. The bandwidth of the 1-cm2 device is extended in low and high frequencies by nonlinear elastic stoppers. With a bias voltage of 46 V (electret@21 V + DC external source@25 V) between the electrodes, the RMS power of the device reaches 0.89 μW at 33 Hz and 6.6 μW at 428 Hz. The -3dB frequency band including the hysteresis is 223~432 Hz, the one excluding the hysteresis 88~166 Hz. We also demonstrate the charging of a 47 μF capacitor used for powering a wireless and autonomous temperature sensor node with a data transmission beyond 10 m at 868 MHz.
Fichier principal
Vignette du fichier
document.pdf (1 Mo) Télécharger le fichier
Origine Publication financée par une institution
Loading...

Dates et versions

hal-01270683 , version 1 (08-02-2016)

Licence

Identifiants

Citer

Y Lu, F Cottone, S Boisseau, Dimitri Galayko, Frédéric Marty, et al.. Low-Frequency MEMS Electrostatic Vibration Energy Harvester With Corona-Charged Vertical Electrets and Nonlinear Stoppers. The 15th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2015), Dec 2015, Boston, United States. pp.012003, ⟨10.1088/1742-6596/660/1/012003⟩. ⟨hal-01270683⟩
665 Consultations
262 Téléchargements

Altmetric

Partager

More