Creep behaviour of HDPE/wood particle composites
Résumé
The effect of particle type, size, content and manufacturing process on the creep behaviour of wood particles/High Density Polyethylene (HDPE) composites has been investigated. Short-term creep tests at different temperatures were carried out and modelled using the Bürger's model and the Findley power law. The creep of the composites was found to increase with temperature due to the mobility of the amorphous bulk and tie HDPE molecules. Increased wood particle content generally decreased the creep level. Jack pine composites exhibited the highest creep reduction due to the chemical composition of the fibres surface and the efficiency of adhesion mechanism between fibres and the HDPE. Injection and compression processes led to better creep behaviour than the extrusion process due to differences in the composites microstructures. Particle size did not show important impacts on the creep properties. Findley power law led to better prediction of long time creep behaviour of the composites.