Synergetic catalytic effect of carbon nanotubes and polyethersulfone on polymerization of glassy epoxy-based systems - isothermal kinetic modelling - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Thermochimica Acta Année : 2014

Synergetic catalytic effect of carbon nanotubes and polyethersulfone on polymerization of glassy epoxy-based systems - isothermal kinetic modelling

Résumé

The effect of multiwalled carbon nanotubes (MWCNTs) and polyethersulfone (PES) on the polymerization kinetics of N,N,N',N'-tetraglycidyl-4,4'-diaminodiphenyl-methane epoxy resin (TGMDA) and 4,4diaminodiphenyl-methane-methylenebis(2,6-diethylaniline) hardener (MDEA) was studied by means of isothermal differential scanning calorimetry. The autocatalytic (Kamal-Sourour) model was applied to fit the experimental values of epoxy conversion and the total reaction order of 3 with partial orders m and n both equal to 1.5 were found. PES alone did not have any significant effect on epoxy crosslinking kinetics due to its phase separation at the beginning of the epoxy-amine reaction. The presence of MWCNTs substantially increases the epoxy reaction rate but lowers the final epoxy conversion. The important synergetic catalytic effect of MWCNTs and PES on the epoxy kinetics was observed.
Fichier non déposé

Dates et versions

hal-01087959 , version 1 (27-11-2014)

Identifiants

Citer

Hynek Benes, Jerome Dupuy, Vincent Lutz, Frédéric Lortie, Jannick Duchet-Rumeau, et al.. Synergetic catalytic effect of carbon nanotubes and polyethersulfone on polymerization of glassy epoxy-based systems - isothermal kinetic modelling. Thermochimica Acta, 2014, 590, pp.107-115. ⟨10.1016/j.tca.2014.06.023⟩. ⟨hal-01087959⟩
81 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More