Geometric and elastostatic calibration of robotic manipulator using partial pose measurements - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Advanced Robotics Année : 2014

Geometric and elastostatic calibration of robotic manipulator using partial pose measurements

Résumé

The paper deals with geometric and elastostatic calibration of robotic manipulator using partial pose measurements, which do not provide the end-effector orientation. The main attention is paid to the efficiency improvement of identification procedure. In contrast to previous works, the developed calibration technique is based on the direct measurements only. To improve the identification accuracy, it is proposed to use several reference points for each manipulator configuration. This allows avoiding the problem of non-homogeneity of the least-square objective, which arises in the classical identification technique with the full-pose information (position and orientation). Its efficiency is confirmed by the comparison analysis, which deals with the accuracy evaluation of different identification strategies. The obtained theoretical results have been successfully applied to the geometric and elastostatic calibration of serial industrial robot employed in a machining work-cell for aerospace industry.
Fichier principal
Vignette du fichier
AdvancedRobotics_2014_Klimchik_Wu_Caro_Furet_Pashkevich.pdf (930.23 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-01084653 , version 1 (19-11-2014)

Identifiants

Citer

Alexandr Klimchik, Yier Wu, Stéphane Caro, Benoit Furet, Anatol Pashkevich. Geometric and elastostatic calibration of robotic manipulator using partial pose measurements. Advanced Robotics, 2014, 28, pp.1419 - 1429. ⟨10.1080/01691864.2014.955824⟩. ⟨hal-01084653⟩
447 Consultations
629 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More