Sub-millimeter measurement of finite strains at cutting tool tip vicinity - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Experimental Mechanics Année : 2014

Sub-millimeter measurement of finite strains at cutting tool tip vicinity

Résumé

The present paper details a simple and effective experimental procedure dedicated to strain measurement during orthogonal cutting operations. It relies on the use of high frame-rate camera and optical microscopy. A numerical post-procedure is also proposed in order to allow particle tracking from Digital Image Correlation (DIC). Therefore strain accumulation within finite strains framework is achieved. The significant magnitude of the calculated strains is partially due to a singular side effect that leads to local material disjunction. The strain localization in the Adiabatic Shear Band (ASB) exhibits different strain paths at various locations along this band and a non-linear evolution of the strain accumulation. A focus is made on the formation mechanisms of serrated chips obtained from Ti6Al4V titanium alloy. The side observation performed during this work allow to proposed three possible scenarios to explain this very phenomenon.
Fichier principal
Vignette du fichier
Main-File-Pottier-et-al-HAL.pdf (2.24 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01022455 , version 1 (10-11-2017)
hal-01022455 , version 2 (19-04-2018)

Identifiants

Citer

Thomas Pottier, Guénaël Germain, Madalina Calamaz, Anne Morel, Dominique Coupard. Sub-millimeter measurement of finite strains at cutting tool tip vicinity. Experimental Mechanics, 2014, 54 (6), pp.1031-1042. ⟨10.1007/s11340-014-9868-0⟩. ⟨hal-01022455v2⟩
300 Consultations
226 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More