Cathodic Fenton degradation of 4,6-dinitro-o-cresol with nano-magnetite - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Journal of Molecular Catalysis A: Chemical Année : 2011

Cathodic Fenton degradation of 4,6-dinitro-o-cresol with nano-magnetite

Résumé

The successful removal of 4,6-dinitro-o-cresol (DNOC) is reported using nano-magnetite (Fe3O4) as the iron source and cathodic Fenton generation of hydrogen peroxide. Operating conditions were optimized by varying the electrolyte concentration, electric current, and O2 flow. The effects of different DNOC initial concentrations, pH values and nano-magnetite quantities on the degradation rate of DNOC were also examined. The results showed that a lower DNOC initial concentration and a lower pH led to faster degradation of DNOC. It was also observed that the amount of nano-magnetite affected the degradation rate at lower pH while having no influence at neutral pH. Both homogeneous and heterogeneous reactions in the system were investigated. The homogeneous reaction dominated at a lower pH; direct electrolysis appears to take place at neutral pH; and a contribution from a heterogeneous reaction was not obvious under the experimental conditions studied. A model was developed to describe the degradation mechanism at low pH conditions, and the model matched experimental data very well. The combination of nano-magnetite and cathodic Fenton provides a fast way to degrade organic contaminants with readily available materials. Furthermore, magnetite is more stable, reusable and easy to separate compared to ferrous salt and other iron rich minerals.

Dates et versions

hal-00920395 , version 1 (18-12-2013)

Identifiants

Citer

Xia Zeng, Khalil Hanna, Ann T. Lemley. Cathodic Fenton degradation of 4,6-dinitro-o-cresol with nano-magnetite. Journal of Molecular Catalysis A: Chemical, 2011, 339 (1-2), pp.1-7. ⟨10.1016/j.molcata.2011.03.001⟩. ⟨hal-00920395⟩
83 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More