A hydrodynamic model for flighted rotary kilns used for convertion of cohesive uranium powders - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Chemical Engineering Science Année : 2013

A hydrodynamic model for flighted rotary kilns used for convertion of cohesive uranium powders

Résumé

The axial and transverse solid distribution of a cohesive powder in flighted rotary kilns was calculated from an original method based on the lifter discharge law previously determined, geometrical calculations and supplementary measurements (in particular the fall velocity of the powder at high temperature). At a given axial position, the quantity of powder falling through the gas, the total quantity of flighted powder as well as the quantity remaining in the bulk are thus calculated; the axial bed depth profile is obtained from the Saeman-Kramers-Afacan model.
Fichier principal
Vignette du fichier
debacqCES2013.pdf (634.79 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-00908458 , version 1 (29-03-2017)

Identifiants

Citer

Marie Debacq, Phahath Thammavong, Stéphane Vitu, Denis Ablitzer, Jean-Léon Houzelot, et al.. A hydrodynamic model for flighted rotary kilns used for convertion of cohesive uranium powders. Chemical Engineering Science, 2013, 104, pp.586-595. ⟨10.1016/j.ces.2013.09.037⟩. ⟨hal-00908458⟩
167 Consultations
323 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More