Shot-Peening of Pre-Oxidized Plates of Zirconium: Influence of Residual Stress on Oxidation
Résumé
The present study deals with oxidation behavior under residual stress of shot-peened plates of ''commercially pure'' zirconium exposed for 30 min at 650 C. The influence of the shot-peening on a pre-oxidized material is presented. The results have been used to determine the influences of these chemical (preoxidation) and mechanical (shot-peening) treatments on the high temperature oxidation of zirconium. The oxygen profile was revealed using micro-hardness techniques and confirmed by SEM-EDS techniques. After pre-oxidation the samples were first resurfaced then shot-peened in order to introduce residual stress. A significant increase of the hardness of about 400 HV was observed on pre-oxidized shot-peened samples. Thermogravimetric analysis for 30 min at 650 C under 200 mbar O2 showed a significantly slower oxidation rate for shot-peened samples. A comparison with our computations points out the role of the residual stresses on the diffusion and, consequently, on the oxidation.
Fichier principal
pre-print_Oxid_of_Metals_Raceanu_Optasanu_Montesin_Montay_Francois.pdf (663.19 Ko)
Télécharger le fichier
Origine | Fichiers produits par l'(les) auteur(s) |
---|
Loading...