Process plans and manufacturing dimensions for the steering of machining: The Copilot-Pro methodology - Archive ouverte HAL Accéder directement au contenu
Communication Dans Un Congrès Année : 2012

Process plans and manufacturing dimensions for the steering of machining: The Copilot-Pro methodology

Résumé

To set the machining, the technique commonly used is to measure dimensions between each machined surface and the one which locates the workpiece into the workpiece holder. This technique leads to dimensions with much smaller tolerances than the ones specified on the design drawing and to long time setting. On an example of a screw machining process we present the first stage of the Copilot-Pro methodology. It consists in identifying the groups of manufacturing operations which must be done before extracting the workpiece from the machine-tool to measure the surfaces achieved. Thus, the number of workpieces extracted from the machine-tool is minimized which reduces the setting times, the number of unfinished and rejected workpieces and which permit to select manufacturing dimensions with higher tolerances.
Fichier principal
Vignette du fichier
PAIREL2012-CAT2012_SansBandeau.pdf (120.47 Ko) Télécharger le fichier
2012-02-19-EP-CopilotManuel-CAT2012-FR.pdf (243.83 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Format : Autre
Loading...

Dates et versions

hal-00762793 , version 1 (13-12-2012)

Identifiants

  • HAL Id : hal-00762793 , version 1

Citer

Eric Pairel, Ephraim Goldschmidt, Benjamin Vayre, Boukar Abdelhakim, Maurice Pillet. Process plans and manufacturing dimensions for the steering of machining: The Copilot-Pro methodology. 12th CIRP Conference on Computer Aided Tolerancing, Apr 2012, Huddersfield, United Kingdom. pp.1--12. ⟨hal-00762793⟩
354 Consultations
489 Téléchargements

Partager

Gmail Facebook X LinkedIn More