Vectorial Electro-Optic Sensors for Microwave Dosimetric Applications - Archive ouverte HAL Accéder directement au contenu
Communication Dans Un Congrès Année : 2011

Vectorial Electro-Optic Sensors for Microwave Dosimetric Applications

Résumé

Fully dielectric pigtailed electro-optic sensors have been developed to quantify the energy absorbed by biological tissues exposed to radiofrequency telecommunication signals (GSM, UMTS, Wi¯, WIMAX). Both applied electric ¯eld and temperature are simultaneously measured, leading to the speci¯c absorption rate (SAR) which constitutes the reference parameter for microwave dosimetric applications. Measurements have been performed in the air and in a biological solution. In the frequency-domain, the electro-optic (EO) probe presents a dynamic range exceeding 70 dB and a sensitivity of 200mV/m¢Hz1=2 in the biological medium. As it presents an intrinsic °at response from quasi DC to 20 GHz, electro-optic probes have also been used in the time-domain to perform ¯rst in situ measurements of ultrashort electric pulses in an electroporation cuvette. A temperature probe sensitivity of 3mK has been reached.
Fichier non déposé

Dates et versions

hal-00678495 , version 1 (13-03-2012)

Identifiants

  • HAL Id : hal-00678495 , version 1

Citer

P. Jarrige, Sophie Kohler, Nicolas Ticaud, L. Duvillaret, G. Gaborit, et al.. Vectorial Electro-Optic Sensors for Microwave Dosimetric Applications. Progess In electromagnetics Research Symposium -29th PIERS, Mar 2011, Marrakech, Morocco. pp.Session Orale. ⟨hal-00678495⟩
269 Consultations
0 Téléchargements

Partager

Gmail Facebook X LinkedIn More