Multiplying optical tweezers force using a micro-lever - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Optics Express Année : 2011

Multiplying optical tweezers force using a micro-lever

Résumé

This study presents a photo-driven micro-lever fabricated to multiply optical forces using the two-photon polymerization 3D-microfabrication technique. The micro-lever is a second class lever comprising an optical trapping sphere, a beam, and a pivot. A micro-spring is placed between the short and long arms to characterize the induced force. This design enables precise manipulation of the micro-lever by optical tweezers at the micron scale. Under optical dragging, the sphere placed on the lever beam moves, resulting in torque that induces related force on the spring. The optical force applied at the sphere is approximately 100 to 300 pN, with a laser power of 100 to 300 mW. In this study, the optical tweezers drives the micro-lever successfully. The relationship between the optical force and the spring constant can be determined by using the principle of leverage. The arm ratio design developed in this study multiplies the applied optical force by 9. The experimental results are in good agreement with the simulation of spring property.
Fichier principal
Vignette du fichier
Photodriven_micro-lever_Chih-Lang_LIN-revised_version-20110915.pdf (413.56 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-00645239 , version 1 (27-11-2011)

Identifiants

Citer

Chih-Lang Lin, Yi-Hsiung Lee, Chin-Te Lin, Yi-Jui Liu, Jiann-Lih Hwang, et al.. Multiplying optical tweezers force using a micro-lever. Optics Express, 2011, 19, pp.20604. ⟨10.1364/OE.19.020604⟩. ⟨hal-00645239⟩

Collections

UGA CNRS LIPHY
108 Consultations
384 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More