High Performance Plasma Sputtered Fuel Cell Electrodes with Ultra Low catalytic metal Loadings
Résumé
Ultra-low Pt content PEMFC electrodes have been manufactured using magnetron co-sputtering of carbon and platinum on a commercial E-Tek_ uncatalyzed gas diffusion layer in plasma fuel cell deposition devices. Pt loadings lower than 0.01 mg cm-2 have been realized. The Pt catalyst is dispersed as small clusters with size less than 2 nm over a depth of 500 nm. PEMFC test with symmetric electrodes loaded with 0.01 mg cm-2 led to maximum reproducible power densities as high as 0.4 Wcm-2 with Nafion 212. Replacement of platinum was also realized by preparing MEAs composed of 0.01 mgPd cm-2 for the anode and 0.01 mgPd cm-2 + 0.001 mgPt cm-2 for the cathode and Nafion 212 membrane. Power density as high as 250 mW cm-2 were achieved at 80°C, which corresponds to a specific power density of 250 kW gPt-1
Domaines
Plasmas| Origine | Fichiers produits par l'(les) auteur(s) |
|---|
Loading...