Electrochemical characterisation of fuel cell stack during cold start - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue European Physical Journal: Applied Physics Année : 2011

Electrochemical characterisation of fuel cell stack during cold start

Résumé

Fuel cell self start at negative temperature conditions is not an easy task due to the water produced by the reduction of oxygen at the cathode. This amount of water can turn into ice and block the reaction before the temperature inside the fuel cell reaches positive values. The mechanism of the physical process which leads to oxidant starvation phenomena when ice appears is not yet well identified. In order to obtain a deeper understanding of this problem, the article presents some experimental investigations conducted on a short fuel cell stack. These experiments simulate vehicle technology operated in cold start conditions not with the primary objective to reach a successful and rapid start-up but much rather to characterise and understand the cold start phenomena until starvation occurs. A number of polarisation curves, electrochemical spectroscopy and cyclic voltammetry measurements are done on the stack before, after and also during the cold starts experiments. It is observed that the process of drying and cooling down prior to cold start have a great impact on the electrochemical cathode area. The results obtained show the evolution of the stack behaviour during the low temperature operation with a slow production of frost. The consequence on the individual cells in terms of inhomogeneous degradation is highlighted.

Dates et versions

hal-00601361 , version 1 (17-06-2011)

Identifiants

Citer

Fabien Harel, Sylvie Begot, Sébastien Wasterlain, Denis Candusso. Electrochemical characterisation of fuel cell stack during cold start. European Physical Journal: Applied Physics, 2011, 54 (2), pp.23402. ⟨10.1051/epjap/2010100267⟩. ⟨hal-00601361⟩
126 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More