The presence of a significant content of fillers accelerates the degradation of ATH filled EPDM subjected to gamma irradiation at room temperature. Above the melting temperature of the EPDM, this induces a decrease in the apparent mechanical reinforcement of the fillers. This also promotes de-cohesion mechanisms which leads to an increase in the strain at break with irradiation dose. It is not clear whether the use of a filler treatment attenuates this accelerating effect or not; however, part of this treatment remains efficient at a high dose and seems also to delay but not suppress the occurrence of de-cohesion mechanisms at large strain. Moreover, at room temperature, i.e. below the melting temperature, all the consequences of ageing by gamma irradiation are strongly attenuated by the presence of a semicrystalline microstructure, the morphology of which is not too strongly modified by irradiation. (C) 2010 Elsevier Ltd. All rights reserved.