Adaptive mesh refinement and automatic remeshing in crystal plasticity finite element simulations - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Modelling and Simulation in Materials Science and Engineering Année : 2009

Adaptive mesh refinement and automatic remeshing in crystal plasticity finite element simulations

Résumé

In finite element simulations dedicated to the modelling of microstructure evolution, the mesh has to be fine enough to: (i) accurately describe the geometry of the constituents; (ii) capture local strain gradients stemming from the heterogeneity in material properties. In this paper, 3D polycrystalline aggregates are discretized into unstructured meshes and a level set framework is used to represent the grain boundaries. The crystal plasticity finite element method is used to simulate the plastic deformation of these aggregates. A mesh sensitivity analysis based on the deformation energy distribution shows that the predictions are, on average, more sensitive near grain boundaries. An anisotropic mesh refinement strategy based on the level set description is introduced and it is shown that it offers a good compromise between accuracy requirements on the one hand and computation time on the other hand. As the aggregates deform, mesh distortion inevitably occurs and ultimately causes the breakdown of the simulations. An automatic remeshing tool is used to periodically reconstruct the mesh and appropriate transfer of state variables is performed. It is shown that the diffusion related to data transfer is not significant. Finally, remeshing is performed repeatedly in a highly resolved 500 grains polycrystal subjected to about 90% thickness reduction in rolling. The predicted texture is compared with the experimental data and with the predictions of a standard Taylor model.
Fichier non déposé

Dates et versions

hal-00509476 , version 1 (12-08-2010)

Identifiants

Citer

Héba Resk, Laurent Delannay, Marc Bernacki, Thierry Coupez, Roland E. Logé. Adaptive mesh refinement and automatic remeshing in crystal plasticity finite element simulations. Modelling and Simulation in Materials Science and Engineering, 2009, 17 (7), pp.Article number 075012. ⟨10.1088/0965-0393/17/7/075012⟩. ⟨hal-00509476⟩
394 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More