High strain rate bulge testing of a DP450 steel using a nylon SHPB system - Archive ouverte HAL Accéder directement au contenu
Communication Dans Un Congrès Année : 2009

High strain rate bulge testing of a DP450 steel using a nylon SHPB system

Vincent Grolleau
Gérard Gary
  • Fonction : Auteur
  • PersonId : 837062

Résumé

A dynamic bulge testing technique is developed to investigate the biaxial plasticity of sheet materials at intermediate and high strain rates. The main component of this new dynamic testing device is a bulge cell which is mounted on the input bar of a conventional split Hopkinson pressure bar system. This cell is designed such that the input bar is in direct contact with the bulging fluid. Thus, it can be used to apply and measure the bulging pressure. Both quasi-static and dynamic bulge experiments are performed on 0.8 mm thick dual phase steel sheets (DP450). Experimental results are presented for equivalent plastic strain rates ranging from 100 to 700/s. The material parameters of a rate-dependent Cowper-Symonds plasticity model are determined through FE-based inverse analysis.
Fichier principal
Vignette du fichier
Grolleau2009.pdf (367.53 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-00425511 , version 1 (28-10-2022)

Licence

Paternité - Pas d'utilisation commerciale

Identifiants

Citer

Vincent Grolleau, Dirk Mohr, Arnaud Penin, Gérard Gary, Bertrand Galpin. High strain rate bulge testing of a DP450 steel using a nylon SHPB system. DYMAT 2009: 9th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, Sep 2009, Brussels, Belgium. pp.597-602, ⟨10.1051/dymat/2009085⟩. ⟨hal-00425511⟩
322 Consultations
49 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More