Biaxial Testing of Sheet Materials at High Strain Rates Using Viscoelastic Bars - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Experimental Mechanics Année : 2008

Biaxial Testing of Sheet Materials at High Strain Rates Using Viscoelastic Bars

Résumé

A dynamic bulge testing technique is developed to perform biaxial tests on metals at high strain rates. The main component of the dynamic testing device is a movable bulge cell which is directly mounted on the measuring end of the input bar of a conventional split Hopkinson pressure bar system. The input bar is used to apply and measure the bulging pressure. The experimental system is analyzed in detail and the measurement accuracy is discussed. It is found that bars made of low impedance materials must be used to achieve a satisfactory pressure measurement accuracy. A series of dynamic experiments is performed on aluminum 6111-T4 sheets using viscoelastic nylon bars to demonstrate the capabilities of the proposed experimental technique. The parameters of the rate-dependent Hollomon–Cowper–Symonds J2 plasticity model of the aluminum are determined using an inverse analysis method in conjunction with finite element simulations.
Fichier principal
Vignette du fichier
grolleau2007.pdf (404.89 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-00171907 , version 1 (13-05-2018)

Identifiants

Citer

Vincent Grolleau, Gérard Gary, Dirk Mohr. Biaxial Testing of Sheet Materials at High Strain Rates Using Viscoelastic Bars. Experimental Mechanics, 2008, 48 (3), pp.293-306. ⟨10.1007/s11340-007-9073-5⟩. ⟨hal-00171907⟩
115 Consultations
523 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More