Generally, tensile testing on Hopkinson bars requires some particular considerations. Most of the specific devices, designed to hold tensile sheet specimens on the bars, involve the degradation of the pulses in particular case of no-direct tensile loadings. A tensile testing configuration for sheet specimens is proposed on the basis of classical split Hopkinson pressure bars (SHPB). Specimens holding is obtained with an epoxy adhesive and provides good measurements on sheet specimens. A comparison is made for the same two metallic materials results extracted from literature and dynamic tensile tests performed with a high speed hydraulic machine and another split Hopkinson bars (SHPB) facility using hat-specimens. A partial overlapping domain in terms of plastic strain is shown at moderate strain rates from 200 to 400 s−1.