3D Electrostatic Hybrid Elements Model for SAW transducers modeling - Centre de mathématiques appliquées (CMAP) Accéder directement au contenu
Article Dans Une Revue IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control Année : 2008

3D Electrostatic Hybrid Elements Model for SAW transducers modeling

Résumé

In this work, the singular behavior of charges at corners and edges on the metallized areas in SAW transducers are investigated. In particular, it is demonstrated that a tensor product of the commonly used Tchebychev bases overestimates the singularities at corners, and, hence, it cannot be used in a proper boundary element method formulation. On the other hand, it is shown that a simple finite element method-like approach is impractical due to the enormous number of unknowns required to model the electrode's large length-to-width ratio. These considerations are then used for defining a hybrid element model, which combines Tchebychev and linear polynomials over differently meshed domains. Such an approach is shown to suitably account for charge singularities while greatly reducing the number of unknowns. Results are obtained for isotropic and anisotropic substrates for non-periodic configurations.
Fichier non déposé

Dates et versions

hal-00283931 , version 1 (01-06-2008)

Identifiants

  • HAL Id : hal-00283931 , version 1

Citer

Carlos F. Jerez-Hanckes, Vincent Laude, Raphael Lardat, Jean-Claude Nédélec. 3D Electrostatic Hybrid Elements Model for SAW transducers modeling. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 2008, 55 (3), pp.686-695. ⟨hal-00283931⟩
165 Consultations
0 Téléchargements

Partager

Gmail Facebook X LinkedIn More