Temperature measurements in a rapid compression machine using anisole planar laser-induced fluorescence - Laboratoire d’Automatique, de Mécanique et d’Informatique Industrielles et Humaines Accéder directement au contenu
Article Dans Une Revue Combustion and Flame Année : 2015

Temperature measurements in a rapid compression machine using anisole planar laser-induced fluorescence

Résumé

Advanced combustion processes induced by self-ignition mechanisms in piston engines, such as Homogeneous Charge Compression Ignition (HCCI), especially need an accurate spatio-temporal temperature information because their phenomenology therefore their performances highly depend on the thermal conditions. The objective of this study is to measure the temperature distribution inside a rapid compression machine (RCM) using anisole planar laser induced fluroescence. The present paper gives a new insight into the interpretation of RCM autoignition data. It also brings useful information for kinetics-related combustion research and combustion modeling. The anisole planar laser-induced fluorescence (PLIF) technique is applied, in order to observe the formation and the evolution of temperature heterogeneities in the combustion chamber prior to the auto-ignition process. Anisole is used as a novel tracer species, and the fluorescence signal's dependence on parameters, such as temperature, pressure and bath gas composition, is quantified in a high-pressure, high-temperature facility. Calibration of the fluorescence signal is defined under RCM-related temperature and pressure conditions and a protocol is proposed for post-processing of the PLIF image sequences, allowing the quantitative field temperatures to be determined at successive instants following compression. In order to gain a better understanding of the mixture process, Particle Image Velocimetry (PIV) measurements are analysed under the same conditions. The correlation between thermal and aerodynamic phenomena is determined. The temperature field is found to be non-uniform, with hot and cold centre positions resulting from recirculation inside the chamber, combined with heat transfer effects from the chamber wall.
Fichier principal
Vignette du fichier
Legros_2015_1.pdf (5.25 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01524469 , version 1 (18-05-2017)

Identifiants

Citer

Khanh-Hung Tran, P Guibert, Céline Morin, Jérôme Bonnety, Stoyan Pounkin, et al.. Temperature measurements in a rapid compression machine using anisole planar laser-induced fluorescence. Combustion and Flame, 2015, 162 (10), pp.3960 - 3970. ⟨10.1016/j.combustflame.2015.07.033⟩. ⟨hal-01524469⟩
162 Consultations
341 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More