Testing with SHPB from quasi-static to dynamic strain rates - Institut de Recherche en Génie Civil et Mécanique Accéder directement au contenu
Communication Dans Un Congrès Année : 2003

Testing with SHPB from quasi-static to dynamic strain rates

Résumé

We have developed a new method for separating dispersive waves in elastic and viscoelastic rods from three-point strain and one-point velocity measurements. Stress, strain, displacement and velocity, which were supposed to be homogenous in a rod section, were therefore determined at any point ofthe bar. This method is based on the assumption of a one dimensional and single mode dispersive wave propagation. This method was used in the frequency domain and took into account wave dispersion. It was shown to be stable with respect to noise. The measuring time is increased considerably. Subsequently, the maximum strain which can be measured in a material tested with a classical SHPB (Split Hopkinson Pressure Bar) set-up is also increased and is no more limited by the length of the bars. The method was used to evaluate the rate sensitivity ofaluminum honeycomb over a wide range ofstrain-rates (from 10 -2 to 1000 s -1).
Fichier principal
Vignette du fichier
othman2003.pdf (369.7 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-01009010 , version 1 (12-05-2023)

Licence

Paternité

Identifiants

Citer

Ramzi Othman, Marie-Noëlle Bussac, Pierre Collet, Gérard Gary. Testing with SHPB from quasi-static to dynamic strain rates. Dymat 2003, 2003, Porto, Portugal. pp.397-404, ⟨10.1051/jp4:20020726⟩. ⟨hal-01009010⟩
74 Consultations
7 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More