Fabrication test of reflective complex optical structure by 3D printing - Ecole Nationale du Génie de l'Eau et de l'Environnement de Strasbourg Accéder directement au contenu
Article Dans Une Revue Proceedings of SPIE, the International Society for Optical Engineering Année : 2018

Fabrication test of reflective complex optical structure by 3D printing

Résumé

We study the possibility of the fabrication of faceted structure with a standard additive fabrication technology using the 3D printer of Objet30 Prime series from Stratasys. The structure contains a small number of facets with size in millimeter: these facets are inclined in two directions. We use analytical expression to solve the tilt angles recorded into a matrix. After obtaining the desired illumination pattern, we try to fabricate the structure with a standard and commercial additive fabrication methods (3D printing) to make a master. We create the STL file usable for the 3D Printer. First tests were made with the printer of the Stratasys Model Objet30 Prime using the material of VeroWhite Plus FullCure 835 and the support model of FullCure 705 from FABLAB at INSA Strasbourg. The common dimension of the element is 6 × 6 facets, where one facet is in millimeter. As printing is conducted with the material of VeroWhite, the quality of the surface profile of the printed model is not sufficient for direct optical applications due to the porous property of the material. As a result, square silicon mirrors are cut and coated with a 100 nm aluminum layer in a second step. Professional adhesive of NHU series from Hart Kunststoff, Germany is used to glue the mirrors on the faceted structure with delicate operation. Then the surface profile of the glued mirrors on the faceted structure is measured with a Zygo Newview 7200 profilometer. A first optical test gives interesting results, but not sufficient for our applications, but this work is an innovation and can give new creativity at the frontier of design and optical applications.
Fichier non déposé

Dates et versions

hal-02401357 , version 1 (09-12-2019)

Identifiants

Citer

Lihong Liu, Thierry Engel, Amadou Coulibaly, Denis Cavallucci, Pierre Pfeiffer, et al.. Fabrication test of reflective complex optical structure by 3D printing. Proceedings of SPIE, the International Society for Optical Engineering, 2018, 10675, ⟨10.1117/12.2307503⟩. ⟨hal-02401357⟩
51 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More