Immobilization of iodide on copper(I) sulfide minerals - Ecole Nationale du Génie de l'Eau et de l'Environnement de Strasbourg Accéder directement au contenu
Article Dans Une Revue Journal of Environmental Radioactivity Année : 2003

Immobilization of iodide on copper(I) sulfide minerals

Résumé

In the goal of finding efficient scavengers for radioiodide in conditions (pH, pE) close to those encountered in deep geological sites, sorption of iodide ions on cuprous sulfide minerals (especially roxbyite, Cu1.75S) has been studied. Surface analysis by X-ray photoelectron spectroscopy has shown that commercial cuprous sulfides are covered by an oxidized overlayer (mainly in the form of CuSO4). Therefore, a synthetic procedure to get roxbyite (typically by mixing Na2S with an aqueous suspension of commercial Cu2O) was applied to produce pure samples with clean surfaces. Batch equilibration of cuprous sulfide particles suspended in aqueous solutions containing iodide species has revealed significant consumption of iodide. The sorption mechanism involves the formation of a surface complex via the exchange of surface hydroxyl groups by iodide anions, as highlighted by a transient pH increase during the immobilization process. Other copper and mixed copper–iron sulfides (e.g. CuS, CuFeS2), which are stable over wide pH and potential ranges are also likely to accumulate iodide species. Because of the specific interaction between iodide and copper(I) centers on the minerals, high distribution coefficients (>1000 ml/g) were observed.

Dates et versions

hal-01942006 , version 1 (02-12-2018)

Identifiants

Citer

Grégory Lefèvre, Jacques Bessière, Jacques Ehrhardt, Alain Walcarius. Immobilization of iodide on copper(I) sulfide minerals. Journal of Environmental Radioactivity, 2003, 70 (1-2), pp.73-83. ⟨10.1016/S0265-931X(03)00119-X⟩. ⟨hal-01942006⟩
27 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More