Influent fractionation and parameter calibration for ADM1: Lab-scale and full-scale experiments - Ecole Nationale du Génie de l'Eau et de l'Environnement de Strasbourg Accéder directement au contenu
Communication Dans Un Congrès Année : 2010

Influent fractionation and parameter calibration for ADM1: Lab-scale and full-scale experiments

Résumé

This paper presents two methods for the characterisation of input and calibration of an ADM1 model. The first, which is adapted for predictive studies, is named “anaerobic respirometry” and consists of a fractionation obtained by the numerical interpretation of methane production rate curves. These curves are obtained in batch experiments after a pulse of studied substrate in an anaerobic sludge. The second method is developed for full-scale application and complex substrates. The fractionation is initially based on balancing previously measured nitrogen, NH4-N and COD contents in influent, reactor and effluent, and combined with the online gas curve calibration procedure for further fine tuning of input fractionation and detection of kinetic parameters for calibration.
Fichier principal
Vignette du fichier
GiraultSteyer-WWTmod2010_1.pdf (674.96 Ko) Télécharger le fichier
Origine : Fichiers éditeurs autorisés sur une archive ouverte
Loading...

Dates et versions

hal-01594904 , version 1 (03-06-2020)

Identifiants

  • HAL Id : hal-01594904 , version 1
  • PRODINRA : 354439

Citer

Romain Girault, Jean-Philippe Steyer, Usama Zaher, A. G. Sadowski, Ingmar Nopens, et al.. Influent fractionation and parameter calibration for ADM1: Lab-scale and full-scale experiments. WWTmod2010 - 2nd IWA/WEF Wastewater Treatment Modelling Seminar, Young Water Professionals committee (YWP). INT., Mar 2010, Mont Saint-Anne, Canada. ⟨hal-01594904⟩
215 Consultations
204 Téléchargements

Partager

Gmail Facebook X LinkedIn More