A metallic Fabry-Perot directive antenna - Ecole Centrale de Marseille Accéder directement au contenu
Article Dans Une Revue IEEE Transactions on Antennas and Propagation Année : 2006

A metallic Fabry-Perot directive antenna

Nicolas Guérin
  • Fonction : Auteur
Stefan Enoch
Gérard Tayeb
Patrick Vincent
  • Fonction : Auteur
Hervé Legay
  • Fonction : Auteur

Résumé

We report the design of a directive antenna using the electromagnetic resonances of a Fabry-Perot cavity. The Fabry-Perot cavity is made of a ground plane and a single metallic grid. The resonance is excited by a patch antenna placed in the cavity at the vicinity of the ground plane. The two remarkable features of Fabry-Perot cavity antennas are, first, that they are very thin and second that only one excitation point is needed. A directivity of about 600 is measured at f=14.80 GHz which is to our knowledge one of the highest directivities reported for an antenna using Fabry-Perot resonances.
Fichier principal
Vignette du fichier
guerin2006.pdf (511.82 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-00023192 , version 1 (24-08-2022)

Licence

Paternité - Pas d'utilisation commerciale

Identifiants

Citer

Nicolas Guérin, Stefan Enoch, Gérard Tayeb, Pierre Sabouroux, Patrick Vincent, et al.. A metallic Fabry-Perot directive antenna. IEEE Transactions on Antennas and Propagation, 2006, 54, pp.220-224. ⟨10.1109/TAP.2005.861578⟩. ⟨hal-00023192⟩
115 Consultations
74 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More